The Bushcrafter is a full-sized knife capable of handling most any outdoor task. Even though it is considered a full-sized knife, it is compact enough to easily belt carry or pack on any outdoor trip. A classic outdoor style knife for all bushcraft, hunting or any other outdoor task.
This knife features A2 tool steel which is an excellent quality cutlery steel. A2 tool steel will take a very keen edge, is abrasive resistant and tough which makes this an excellent knife for aggressive users.
The custom quality of every aspect of this knife will impress you! Get one of these highly sought after knives today... You won't be disappointed!
A deluxe leather "D" ring dangler pouch sheath is included.
About A2 Carbon Steel
AISI A2 is a carbon steel with the addition of 5% chromium and 1.1% molybdenum, allowing it to quench in still air (A for Air.) While stainless amounts of chromium (12% or more) make tool steel gummy and hard to sharpen, the modest amount of chromium in A2 improves its toughness and abrasion resistance, but imparts only a slight measure of corrosion resistance (like high carbon steel, it will rust and appropriate preventative care must be taken.) During heat treatment the chromium addition combines with some of the carbon in the alloy to form chromium carbides: tough, hard particles dispersed through the steel. These carbides are the primary contributors to A2's celebrated edge retention. A2 is one of the steels that responds well to cryogenic treatment. This extreme cold treatment (-320 degrees F) essentially finishes the original quench, increasing the Steel's toughness without any decrease in hardness. You get increased wear resistance without any increase in brittleness so a cryogenically treated blade will hold its edge longer. You can keep working instead of sharpening. A2 is a great steel that offers a real improvement in edge retention over some of the simpler carbon steels.
No posts found